In this article, we'll provide you with a step-by-step guide on how to install a pedestal bathroom sink to perfection, ensuring a secure and leak-free result.
Step 1: Marking and Preparation
Before diving into the installation process, start by placing the basin column in the desired location and marking the position of the basin's installation hole. This crucial step ensures that your sink will be perfectly aligned.
Step 2: Drilling and Anchoring
With the marked position in place, use a drill to create a hole on the wall. Then, secure an expansion bolt into the installation hole. Attach the end of the bolt to the corresponding expansion bolt on the basin. This secure anchoring will provide the necessary support for your sink.
Step 3: Faucet and Basin Attachment
Once the anchor points are in place, proceed to install the faucet. Then, firmly attach the basin to the bolts that are already anchored on the wall. Ensuring a secure connection here is vital to prevent any potential leaks in the future.
Step 4: Drain Fittings and Sealant Application
Follow the provided instructions to install the drain fittings correctly. Make sure to connect the inlet and drain pipe fittings precisely. To prevent leaks, seal the bottom of the drainage with high-quality silicone. Pay special attention to the faucet, water inlet, and drain pipe fittings, as any instability could result in unwanted leakage. After installation, thoroughly check for any defects, especially water leakage.
Step 5: Finalizing the Installation
Once the basin is securely in place, position the column accordingly. Apply adhesive sealing materials like silicone to the contact surfaces between the basin and the wall, as well as between the column and the ground. Avoid using epoxy resin glue or other materials that expand after hardening.
By following these expert tips and carefully executing each step, you can achieve a leak-free pedestal bathroom sink installation that adds both style and functionality to your bathroom.
