Section 1: Dry Fit Outlet Pipe and Inlet Pipe
To begin the installation process, follow these steps:
2. Apply lubricant on the straight pipe and the connecting pipe and then fully insert these two pipes into the toilet bowl. Draw lines to mark as the following picture shows.
Section 2: Cutting the Extra Length of the Pipe
To ensure a proper fit, follow these steps:
1. Measure the distance between the marks on the straight pipe and connecting pipe.
2. Deduct the measured distance from the bald end of the pipe.
3. Cut the pipes accordingly and use a file to remove any burrs.
L1: The distance from the two marks on the straight pipe.
L2: The distance from the two marks on the connecting pipe
NOTE: Drawings may not exactly define contour of the product.
Section 3: Installing the Toilet Bowl
The next step involves installing the toilet bowl. Here's what you need to do:
1. Install the straight pipe and the connecting pipe on the wall, aligning them with the marked positions.
2. Carefully place the toilet bowl onto the pipes, ensuring a secure fit.
Section 4: Leveling the Toilet & Applying Sealant
To complete the installation, follow these final steps:
1. Use a level to measure the toilet bowl and adjust as necessary to ensure it is level.
2. Fill any gaps between the toilet bowl and wall with cement or sealant.
3. Allow the sealant to dry for at least 24 hours before removing any side panels.
Proper installation of a wall hung toilet is essential for functionality and aesthetics. By following the step-by-step instructions provided in this article, you can achieve a successful installation. Enjoy the benefits of a modern and space-saving wall hung toilet in your bathroom.
